SCM110A Pro
Overview
- ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
- Twin full “SL” spec 9˝/234mm bass driver.
- ATC 75mm “Super Dome” mid driver.
- On board ATC grounded source 350W Tri-amp pack.
- LF contour control.
- Clip indication.
- 6 year warranty.
‘Special Order Item’
Technical Specification
Drivers: HF 1″/25mm, Mid 3″/75mm, LF 2x 9″/234mm
Amplitude Linearity (±2dB): 50Hz-17kHz
Cut-off Frequencies (-6dB, free-standing): 30Hz, 25kHz
Horizontal Dispersion: ±80°, Coherent
Vertical Dispersion: ±10°, Coherent
Max. Continuous SPL (1 metre): 115dB
Crossover Frequencies: 380Hz, 3.5kHz
Audio Input: Rear panel mounted female xlr (pin 2 +)
Input Sensitivity: 1V
Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
Input Impedance: Balanced > 10kΩ
Amplifier Output: Bass 200W, Mid 100W, High 50W
Filters: Even Order Critically Damped
Overload Protection: Active FET momentary gain reduction (amplifiers)
Front Panel Indicators: Power On indicator, Gain Reduction warning
LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)Physical Dimensions
Dimensions (HxWxD): 715 x 625 x 420mm (28.2˝ x 24.5˝ x 16.5˝) Depth with amplifier at rear adds 3˝
Weight: 73kg / 160.6lbsIn-Wall Monitors
Model Notes
In-Wall / Soffit Mount models have full-face square edge baffles & a recessed connector panel in rear.Remote amp hardware is required, as well as NL8 speaker cables & 5-pin XLR LED cables - sold seperately. Cable lengths must be specified – Max. 10m recommended.
Centre Models
Centre models are for use in surround systems and are supplied as single units. The drivers are vertically aligned and not offset as in the standard models.
Low Profile models (SCM110A CLP and SCM110AiW CLP have vertically aligned mid and high frequency drivers and are for LCR surround arrays.